Description
The 30 watt F1 and 10 Watt 100V Line F1LT are new design concepts specifically manufactured for the commercial loudspeaker market.
The highly-stlyed enclosure (produced in self-colour, heavily-damped, mineral-loaded polypropylene) contains a high-power 100mm full-range drive unit, electronically equalised for optimum performance in background music applications.
The F1LT contains a 100 volt line transformer with taps for 0.6, 1.35, 2.5, 5 and 10 watts, accessed through an external connecting block at the rear of the cabinet. For ease of installation, each F1 and F1LT is supplied complete with a unique, steel universal wall fixing bracket which allows adjustment in all three planes.
The Wharfedale F1 is also available in a stylish and atractive creamy
white finish.
| MODEL: | F1 |
|---|---|
| Type | Ported |
| Frequency Response | 100Hz - 15KHz |
| Sensitivity (2.83V @ 1m) | 87dB |
| Nominal Impedance | 6 ohms |
| Power Handling | 30 Watts (DIN) |
| Dimensions | 165 (W) x 142(H) x 122(D) mm |
| Finish | Mineral Loaded Poloypropylene |
| Terminals | Spring Clips |
| Mounitng | Wall brackets included |
| Weight | 1.1kg single unit |
| Drive Units | 1 x 100mm FR |
| MODEL: | F1LT |
|---|---|
| Type | Ported |
| Frequency Response | 100Hz - 15KHz |
| Sensitivity (2.83V @ 1m) | 86dB |
| Nominal Impedance | 100V Line |
| Power Handling | 10W / 5W / 2.5W / 1.25W / 0.6W |
| Dimensions | 165 (W) x 142(H) x 122(D) mm |
| Finish | Mineral Loaded Poloypropylene |
| Terminals | Screw Connectors |
| Mounitng | Wall brackets included |
| Weight | 1.1kg single unit |
| Drive Units | 1 x 100mm FR |
Description
The 50 watt F5-Array takes advantage of the fact that the output of each drive unit becomes more directional as the frequency rises. By skewing these units in vertical array, the response is held close to constant in the horizontal plane.
By contrast, the coverage in the vertical plane is kept narrow, thereby reducing the amount of "splash-back" from ceilings and floors with a consequent improvement in speech intelligibility.
The F5-Array uses five high power, full range 100mm drive units to ensure a consistent and reliable operating life. This loudspeaker is carefully equalised by a passive filter network and so gives excellent results both with music and speech signals.
The F5-Array is supplied with a substantial steel wall bracket which
allows the loudspeaker to be mounted vertically or horizontally, with 180°
adjustment in the horizontal plane.
| MODEL: | F5-Array |
|---|---|
| Type | A constant length line-source loudspeaker with constant directional characteristics |
| Frequency Response | 70Hz - 15KHz |
| Sensitivity (2.83V @ 1m) | 92dB |
| Nominal Impedance | 4 ohms |
| Power Handling | 50 Watts (DIN) |
| Dimensions | 800 (W) x 142(H) x 122(D) mm |
| Finish | Mineral Loaded Poloypropylene |
| Terminals | Spring Clips |
| Mounitng | Wall brackets included |
| Weight | 6.5kg single unit |
| Drive Units | 5 x 100mm FR with copper-capped panels |
DESCRIPTION
The PG30D has been based on the successful design of the Wharefdale Diamond. It stands just 9" high, 7" wide and 8" deep and uses the new Wharfedale-design drive units for extended and smooth high frequency response.
Tight dynamic bass is guaranteed by the use of Wharfedale technology and a large magnet bass/midrange unit. A new crossover features TOP (Tweeter Overload Protection) to prevent accidental damage whilst allowing a full 75 watts of power handling.
NOW
ALSO AVAILABLE...
The PG30DLT 100V Line version of this best selling speaker.
Tapped at 10, 5, 2.5 & 1.25 watts.
CONSTRUCTION & ELECTRICAL
| MODEL: | PG30D |
|---|---|
| Enclosure | 15mm rigid particle board carcass |
| Grille | Acoustically transparent |
| L.F. Unit | 1 x 110mm bass unit |
| H.F. Unit | 19mm metallised mylar film dome tweeter |
| Crossover | High quality film capacitor
Overvoltage protection Spring clip terminals |
TECHNICAL SPECIFICATIONS
| MODEL: | PG30D | PG30DLT |
|---|---|---|
| Enclosure Type | 2-way rear ported reflex | 2-way rear ported reflex |
| Frequency Response | 50Hz - 20KHz | 100Hz - 20KHz |
| Sensitivity (for 2.83 volts input; 1 metre | 86dB | 1, 2, 4, 8K |
| Max. SPL per pair | 106dB | - |
| Effective Volume | 5.2 litres | 93dB |
| Nominal Impedance | 8 Oms | - |
| Weight | 3.3kg | 3.8kg |
| Power Handling | 75W (DIN) | - |
| Cabinet Dimensions | 240(H) x 186(W) x 202(D)mm | 240(H) x 186(W) x 202(D)mm |
| Finish | Black Ash | Black Ash |
DESCRIPTION
The 2080 Loudspeaker is the latest model to join Wharfedale's range of professional loudspeakers. Its pedigree stems from the successful Programme 20, one of the accepted standards in CD Jukebox extension speaker installation and also from the ever popular 2180. The 2080 is an attractive 2-way system designed for wall or shelf mounting, equally at home in portrait or landscape orientation. The speaker features bass-reflex tuning through a twin rear port tubes providing optimal low-frequency tuning, enhancing the already substantial bass output from this high quality enclosure.
High performance Wharfedale drive units are used with a substantial 200mm woofer crossing over to a high quality 25mm tweeter complete with ferrofluid cooled voice coil ensuring consistent and reliable long term performance. The 2080 comfortably handles a full 100 watts of power.
This top quality loudspeaker consists of a substantial lateral wrap
cabinet providing high strength for safe rear bracket mounting. It has
an attractive black finish with removable black cloth grilles.
| MODEL: | 2080 |
|---|---|
| Enclosure | 18mm particle board |
| Damping | Fire retardent acrylic wadding |
| L.F. Unit | 1 x 200mm Paper coned bass/mid-driver with high temperature voice coil |
| H.F. Unit | 1 x 25mm pre-coated fabric domes, ferrofluid cooled and damped |
| Crossover | Computer grade crossover board, high saturation chockes |
| Tweeter Protection | Auto resetting thermal overload protection |
| Terminals | 4 terminal spring-clip for series/parallel connection |
| MODEL: | 2080 |
|---|---|
| Enclosure Type | Bass reflex - twin port on rear of cabinet |
| Frequency Response | 40Hz - 20KHz |
| Sensitivity | 90dB |
| Max. SPL per pair | 113dB |
| Crossover Frequency | 2.3KHz |
| Nominal Impedance | 8 Ohms |
| Power Handling | 100 Watts (programme) |
| Cabinet Dimensions | 274(H) x 456(W) x 200(D)mm |
| Weight | 6kg single unit |
| Finish | Black Textured |
DESCRIPTION
The self-powered Link 600 makes it easy to bring sound to precisely
where its needed as each unit has a volume control and can be 'switched
out' or added at will. The power requirement is a simple mains socket,
signal transfer being made via rugged XLR connectors.
| MODEL: | LINK 600 |
|---|---|
| Amplification | Built-in 20W monolithic |
| Output Level | 99dBA SPL undistorted |
| Inputs | Male and female XLR sockets |
| Drive Requirements | 600ohm balanced line |
| Maximum Cable Run | 100 metres per unit |
| Useable Frequency Range | 50Hz to 20KHz |
| Directivity Characteristics | Hemispherical |
| Bass Driver | 1 x 110mm |
| H.F. Driver | 1 x 25mm dome |
| Dimensions | 240(H) x 186(W) x 204(D)mm |
| Weight | 4kg |
| Finish | Black Ash |
The quest for excellence in sound, combined with fine design and discrete appearance is the approach which lies behind the Wharfedale 3180 and 2180 Loudspeakers, offering a highly innovative solution to good stereo imagery in difficult room conditions via use of the 'Baker effect'.
The dispersion pattern is greatly extended resulting in a wide listening
area over 120 degrees. The 3180 and 2180 Loudspeakers have the energy and
dynamics to produce a loud, punchy sound that is ideal for fun pubs, karaoke
bars and small club situations etc.
| MODEL: | 3180 |
|---|---|
| Enclosure | 18mm particle board |
| Damping | Fire retardent acrylic wadding |
| L.F. Unit | 2 x 200mm paper covered bass/mid driver |
| H.F. Unit | 2 x 25mm pre-coated fabric domes, ferrofluid cooled and damped |
| Crossover | Computer grade crossover board, high saturation chokes |
| Tweeter Protection | Auto resetting thermal overload protection |
| Terminals | 4-terminal spring-clip for series/parallel connection |
| MODEL: | 3180 |
|---|---|
| Enclosure Type | Bass reflex |
| Frequency Response | 40Hz - 20KHz |
| Sensitivity | 92dB |
| Max. SPL per pair | 115dB |
| Crossover Frequency | 2.3KHz |
| Impedance | 4 Ohms |
| Weight | 11kg single unit |
| Effective Volume | 27 Litres |
| Power Handling | 150 Watts (DIN) |
| Cabinet Dimensions | 270(H) x 570(W) x 290(D)mm |
| Finish | Black textured vinyl |
The 3180 and 2180 Loudspeaker Range:
| MODEL: | 2180 |
|---|---|
| Enclosure | 18mm particle board |
| Damping | Fire retardent acrylic wadding |
| L.F. Unit | 1 x 200mm paper covered bass/mid driver |
| H.F. Unit | 2 x 25mm pre-coated fabric domes, ferrofluid cooled and damped |
| Crossover | Computer grade crossover board, high saturation chokes |
| Tweeter Protection | Auto resetting thermal overload protection |
| Terminals | 4-terminal spring-clip for series/parallel connection |
| MODEL: | 2180 |
|---|---|
| Enclosure Type | Bass reflex |
| Frequency Response | 40Hz - 20KHz |
| Sensitivity | 90dB |
| Max. SPL per pair | 113dB |
| Crossover Frequency | 2.3KHz |
| Impedance | 8 Ohms |
| Weight | 6.5kg single unit |
| Effective Volume | 14 Litres |
| Power Handling | 100 Watts (DIN) |
| Cabinet Dimensions | 274(H) x 456(W) x 200(D)mm |
| Finish | Black textured vinyl |
DESCRIPTION
Force 9 is the first in a series of Wharfedale-built sound reinforcement products and has already created enormous impact with users during its extensive proving trials.
Because the needs of the professional user are so varied, a speaker must be able to give a good account of itself in a multitude of different circumstances and locations, and it must do so while remaining both manageable in size and affordable in price.
The heart of the Force 9 is a purpose-developed 12" co-axial driver which combines very high power handling with superb frequency coverage and controlled dispersion characteristics.
It is clean and efficient across the full spectrum, making full use of the available amplifier power. This is as important and as noticeable at low volume as it is at higher SPLs. Force 9 stays smooth and unruffled from a whisper to a roar.
CONSTRUCTION
The Force 9-P Loudspeaker is manufactured in rugged polyetylene, designed for both portable and permanent systems.
The trapezoidal enclosure can be flown, stand or bracket mounted, singly
or in clusters or arrays. Their controlled 60 degree vertical and horizontal
dispersion takes the guesswork out of placement and system design, while
allowing both portrait and landscape orientation.
| MODEL: | FORCE 9-P |
|---|---|
| Frequency Response | 50Hz - 20 KHz |
| Power Handling | 250W (DIN) |
| Sensitivity (1 Watt @ 1 metre | 98dB |
| Peak SPL (@ 1 metre)
Maximum continuous SPL (@ 1 metre) |
128dB
122dB |
| HF Dispersion (-6dB)
Pattern |
60° x 60°
Conical |
| Transducer Complement | 1 x 12" Low Frequency
1x 45mm Compression HF |
| Impedance (nominal) | 8 ohms |
| Internal Volume | 40 litres |
| Mounting | M8 bushes x 6 |
| Dimensions | 550(W) x 383(H) x 383(D) mm |
| Weight | 13.8kg (9-P) / 17.2kg (9-W) |