FEATURES
| Part No.: | LM-9414 |
|---|---|
| Input Sensitivity/Impedance | |
| Mic | 1mV/600ohm Balanced |
| Line | 100mV, 300mV, 1.5V/10Kohm Balanced |
| Insert | 0.775V |
| Tone Control | |
| High | ±12dB at 10KHz |
| Med | ±12dB at 10KHz |
| Low | ±12dB at 10KHz |
| Frequency Response | 20Hz to 20KHz (-1dB) |
| THD at 1KHz Rated Oupot | Less than 0.05% |
| Bus Output | 1.2V/600ohm Balanced |
| Headphone Output | 2V/33ohm |
| Monitor Output | 1.2V/600ohm Balanced |
| Stereo Output | 1.2V/600ohm Balanced |
| Power Requirement | AC 115V/230V 50/60Hz DC +24V |
| Dimensions | 482(W) x 177(H) x 280(D) mm |
| Weight | 7.5kg |
Click this link
to load a technical diagram
FEATURES
| Part No.: | MX-880E |
|---|---|
| Input Sensitivity/Impedance | |
| Mic | 1mV/10Kohm |
| Mic Att | 19mV/10Kohm |
| Phono | 2mV/47Kohm |
| CD/Video | 150mV/47Kohm |
| Line | 300mV/47Kohm |
| Frequency Response | |
| Mic | 20Hz - 20KHz |
| Mic Att | 20Hz - 20KHz |
| Phono (10KHz) | -13dB |
| Phono (100hz) | +13dB |
| Line | 20Hz - 20KHz |
| Rated Output Voltage | 3V/600ohm |
| Effect Send | 1V/600ohm |
| THD at 1KHz, Rated Output | 0.03% |
| Signal to Noise Ratio | |
| Mic | 60dB |
| Mic Att | 70dB |
| Phono | 65dB |
| Line | 70dB |
| Power Source | AC 100V/120V/220V/240V, 50/60Hz |
| Dimensions | 339(W) x 80(H) x 252(D) mm |
| Weight | 3.2kg |
Click this link
to load a technical diagram
FEATURES
| Part No.: | MX-642 |
|---|---|
| Input Sensitivity/Impedance | |
| Mic | -60dB/600ohm (Balanced) |
| Line In (CH1 - CH6) | -36dB/47Kohm (Balanced) |
| Line In (CH7L - CH14R) | -20dB/20Kohm (Unbalanced)
-10dB/10Kohm (Unbalanced) +4dB/10Kohm (Unbalanced) |
| AUX Return | -10dB/10Kohm (Unbalanced) |
| Sub In | +4dB/10Kohm (Unbalanced) |
| Tape In | -10dB/10Kohm (Unbalanced) |
| Tone Control | |
| High 12KHz | ±15dB |
| Mid 2.5KHz | ±15dB |
| Low 80hz | ±15dB |
| THD (ST l/R, AUX Send) | 0.1% |
| Frequency Response (+1/-2dB) | 20Hz-20KHz |
| Output Level/Impedance | |
| ST Out | +4dB/600ohm (Balanced) |
| AUX Send | +4dB/600ohm (Unbalanced) |
| Monitor Out | +4dB/600ohm (Unbalanced) |
| REC Out | -10dB/10Kohm (Unbalanced) |
| Headphone (Maximum) | 100mW/40ohm |
| Hum and Noise | |
| Ein | -128dB |
| Buss Noise ST l/R | -78dB |
| AUZ Send | -78dB |
| Cross Talk | |
| Adjacent Input CH | 70dB |
| Adjacent Output CH | 70dB |
| Phantom Power | +48V, DC |
| Power Source | AC 115/230V, 50/60Hz |
| Power Consumption | 30W |
| Dimensions | 440(W) x 390(H) x 92(D) mm |
| Weight | 17kg |
Click this link to
load a technical diagram
FEATURES
| Input Connector | Input Impedance | Nominal Impedance | Nominal Input | Connector Type |
|---|---|---|---|---|
| CH MIC | 4Kohm | 50-600ohm | -60dB | XLR 3-31 Type Balanced |
| LINE | 10Kohm | 600ohm | -20dB | Phone Jack (TRS)
T=Hot R=Cold S=GND |
| AUX RETURN | 10Kohm | 600ohm | +4dB | Phone Jack Unbalanced |
| INSERT | 5Kohm | 600ohm | 0dB | Phone Jack (TRS)
T=Out R=In S=GND |
| TAPE IN | 10Kohm | 600ohm | -10dBV | RCA Pin Jack |
| Output Connector | Output Impedance | Nominal Impedance | Nominal Output | Connector Type |
| STEREO OUT L/R
MONO |
150ohm | 600ohm | +4dB | XLR 3-31 Type |
| REC OUT | 2Kohm | 10Kohm | -10dBV | RCA Pin Jack |
| AUX SEND 1-4 | 75ohm | 600ohm | +4dB | Phone Jack Unbalanced |
| INSERT OUT | 600ohm | 10Kohm | 0dB | Phone Jack (TRS)
T=Out R=In S=GND |
| PHONE OUT | 100ohm | 40ohm | 3mW | ST Phone Jack |
| Part No.: | CMX-1642 |
|---|---|
| Frequency Response | 10Hz - 20KHz +1, -2dB
(ST L/R, Mono Out @600ohm, AUX Send @600ohm) |
| Total Harmonic Distortion | <0.1% @ +14dB 20HZ-20KHz
(ST L/R, Mono Out @ 600ohm, AUX Send @600ohm) |
| Hum & Noise (Average Rs = 150ohm) | |
| Equivalent Input Noise (CH1 - 16) | -127dB |
| Residual Output Noise(ST L/R, Mono Out) | -95dB |
| Residual Output Noise(AUX Send 1-4) | -95dB |
| (ST L/R, Mono)
(Master Fader at nominal level and all channel assign switch off |
-88dB |
| (67db S/N)(ST L/R, Mono)
(Master Fader and one channel fader at nominal level) |
-63dB |
| (AUX Send 1-4)
(Master control at nominal level and all channel assign switch off) |
-78dB |
| (67dB S/N)(AUX Send 1-4)
(Master control and one channel AUX at nominal level) |
-63dB |
| Maximum Voltage Gain: | |
| Mic In to Stereo LR | 84db |
| Mic In to Mono Out | 84db |
| Mic In to AUX Send 1,2 | 76db |
| Mic In to Aux Send 3,4 | 86db |
| AUX Return to Stereo L,R | 16db |
| Tape In to Stereo L,R | 28db |
| Crosstalk at 1KHz: | |
| Adjacent Input Channel | -70db |
| Input to Output | -70db |
| Input Channel Equalisation | |
| Maximum Boost or Cut in each 3 bands | ±14dB |
| High | 12KHz shelving |
| Mid | 250Hz - 5KHz peaking |
| Low | 80Hz shelving |
| Input Gain Control | |
| Mic | 44dB, variable from -60 to -16dB |
| Line | 44dB, variable from -20 to +24dB |
| Level Meters (0 point = +4dB Output Level) | 10 segment LED x 2
Stereo L/R (Switchable) PFL or AFL (Switchable) |
| Channel Peak Indicator | Red LED on each channel turns on
when post EQ signal reaches the level 3dB below clipping |
| AUX Send Peak Indicator | Red LED on each channel turns on
when post EQ signal reaches the level 3dB below clipping |
| Phantom Power | +48V DC |
| Power Requirement | 120V,220V/60Hz, 230V/50Hz, 36W |
| Dimensions | 632(W) x 109(H) x 509(D) mm |
| Weight | 14kg |
){kind=link}
){kind=link}
){kind=link}
){kind=link}