AUDIO INSTALLATION ACCESSORIES

LOUDSPEAKER CABLE

West Penn Wire Audio Cable

Specially designed for 100V Line installations,

224-1000

224-1000(1mm)

Ideal for short to medium length loudspeaker runs, such as shops, offices, garages and churches.

225-1000

Suitable for medium to long length loudspeaker runs, including supermarkets, department stores, offices, factory units and larger church installations.

226-1000

Suitable for large scale installations such as stadiums, large industrial factories and plants. Also suitable as high quality LOW-Z cable (music systems).

SHIELDED MICROPHONE/LOUDSPEAKER CABLE

Used for hardwired microphone installations, or for shielded 100V Line Loudspeaker runs.

291-1000

291-1000 (0.22mm)

Used for microphone/Line Signal Wiring

293-1000

General purpose hardwired Microphone/Line signal cable. Suitable for medium to long installations, or for medium 100V Loudspeaker runs.

294-1000

Long line Microphone or Line signal cable or longer loudspeaker runs.

357-1000

357-100 (0.22mm)

Microphone cable with extra control pair, for microphone installations which require a separate switch pair for activating chimes, relays and external equipment.
Part No.: 224 225 226 291 293 294 357
Number of Conductors: 2 2 2 2 2 2 4
Conductor Size: 1mm 1.5mm 2.5mm 0.22mm
24 Strd. Drain		 1mm
20 Strd. Drain		 1.5mm
18 Strd. Drain		 0.22mm
24 Strd. Drain
Nominal Insulation:
inches 0.010 0.010 0.014 0.010 0.010 0.010 0.010
mm 0.25 0.25 0.36 0.25 0.25 0.25 0.25
Nominal jacket Thickness:
inches 0.020 0.020 0.025 0.020 0.020 0.020 0.020
mm 0.51 0.51 0.64 0.51 0.51 0.51 0.51
Nominal Outside Diameter:
inches 0.165 0.199 0.244 0.141 0.169 0.192 0.178
mm 4.20 5.05 6.20 3.58 4.29 4.88 4.52
Nominal Insulation:
pf/ft
Capacitance between conductors		 - - - 55 68 80 55
pf/m
Capacitance between conductors		 - - - 180 223 262 180
pf/ft
Capacitance between one conductor and the other connected to the shield		 - - - 99 122 144 99
pf/m
Capacitance between one conductor and the other connected to the shield		 - - - 325 400 472 325

LVC Series 100V Line Attenuators

LVC Series

A range of 100V Line Attenuators, both fitted to UK standard size with plastic faceplates, with continuously rotatable grey controls (to avoid damaging). terminatros are made via push-on screw terminals at the rear of the PCB, which will accept cable with a maximum diameter of 2.5mm. The Paging Override can be preset at any one of four levels - Hi, Intermediate, Intermediate 2 and Lo.

LVC-25-B 25w Attenuator

LVC-100-B 100w Attenuator


MS1 / MS2 Microphone Wall Plates

The MS1 and MS2 are etremely useful installation accessories consisting of single ganag (MS1) and dual gang(MS2) Wall Plates, with Switchcraft type D3f 3pin female XLR sockets. Faceplates are finished in dark grey/black
Model: MS1 MS2
Dimensions 86(L) x 86(W) x 40(D)mm 146(L) x 86(W) x 40(D)mm

FURTHER AVAILABLE ACCESSORIES