Dedcat - Commercial Sound 97-98 Section 4

EQUALISERS / SIGNAL PROCESSING

EQ-9131 GRAPHIC EQUALISER

EQ-9131 Graphic Equaliser

FEATURES

1 Channel 31 Band Equaliser
EQ Level Control
1/3 Octave 20Hz - 20KHz 12dB
40Hz HPF12dB/Octave

Part No.:	EQ-9131
Frequency Response	20 Hz to 20KHz (±1dB)
Input Sensitivity	1V Balanced
Output Level	1V Balanced
Equaliser Level	±12dB
Equaliser Frequency	20, 25, 32, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1k, 1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k, 5k, 6.3k, 8k, 10k, 12.5k, 16k, 20k
Low Cut Filter	-12dB/Oct
Signal to Noise Ratio	Better than 85dB
T.H.D.	Less than 0.01%
Power Source	AC 115V/230V, 50/60Hz
Power Consumption	10W
Dimensions	482(W) x 44(H) x 280(D) mm
Weight	3.5kg

EQ-9231 GRAPHIC EQUALISER

EQ-9231 Graphic Equaliser

FEATURES

2 Channel 31 Band Equaliser
EQ Level Control
1/3 Octave 20Hz - 20KHz 12dB
40Hz HPF12dB/Octave

Part No.:	EQ-9231
Frequency Response	20 Hz to 20KHz (±1dB)
Input Sensitivity	1V Balanced
Output Level	1V Balanced
Equaliser Level	±12dB
Equaliser Frequency	20, 25, 32, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1k, 1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k, 5k, 6.3k, 8k, 10k, 12.5k, 16k, 20k
Low Cut Filter	-12dB/Oct
Signal to Noise Ratio	Better than 85dB
T.H.D.	Less than 0.01%
Power Source	AC 115V/230V, 50/60Hz
Power Consumption	20W
Dimensions	482(W) x 88(H) x 280(D) mm
Weight	4kg

EQ-9152 STEREO GRAPHIC EQUALISER

EQ-9152 Stereo Graphic Equaliser

FEATURES

2 Channel 15 Band Equaliser
2/3 Octave 20Hz - 20KHz 12dB
40Hz HPF 12dB/Octave

Part No.:	EQ-9152
Frequency Response	20 Hz to 20KHz (±1dB)
Input Sensitivity	1V Balanced
Output Level	1V Balanced
Equaliser Level	±12dB
Equaliser Frequency	20, 40, 63, 100, 160, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 10k, 16k
Low Cut Filter	-12dB/Oct
Signal to Noise Ratio	Better than 85dB
T.H.D.	Less than 0.01%
Power Source	AC 115V/230V, 50/60Hz
Power Consumption	15W
Dimensions	482(W) x 44(H) x 280(D) mm
Weight	3.5kg

Click this link to load a technical diagram

PEQ-9115 PARAMETRIC EQUALISER

PEQ-9115 Parametric Equaliser

FEATURES

5 Band Parametric Equaliser with Level Control and Band ON/OFF switch
Band Width Control: 0.08 - 2 Octave
Connector: Balanced ¼" Jack Plug or XLR IN/OUT per Channel
Ground Selector: Float/Frame

Part No.:	PEQ-9115
Input Sensitivity/Impedance	+4dB/20Kohm Balanced
Ouput Level/Impedance	+4dB/600ohm Balanced
Max. Output/Impedance	+20dB/600ohm Balanced
T.H.D.	Less than 0.1%
Frequency Range	20Hz to 20KHz (±1dB)
Filters:
Type	Parametric 5 Band
Bandwidth	1/2 - 2 octave
Gain	±15dB at 2 octave
Frequency Range - Band 1	20Hz - 320Hz
Frequency Range - Band 1	60Hz - 1KHz
Frequency Range - Band 1	150Hz - 2.5KHz
Frequency Range - Band 1	380Hz - 6.5KHz
Frequency Range - Band 1	1.2KHz - 20KHz
Power Source	AC 115V/230V, 50/60Hz
Power Consumption	15W
Dimensions	482(W) x 44(H) x 280(D) mm
Weight	6kg
Options	In/Out Balance Transformer

Click this link to load a technical diagram

DIV-9123 STEREO ELECTRONIC CROSSOVER

DIV-9123 Stereo Electronic Crossover

FEATURES

2 Way Stereo and 3 Way Mono operating system by selector switch
Cut off slope: 24dB/Oct
Crossover level and frequency control
Input level control
Range and mute switch
Subwoofer level and frequency control with 30Hz high-pass filter
Ground selector switch: Ground/Lift

Part No.:	DIV-9123
Crossover Mode	2 way Stereo, 3 way Mono
Crossover Frequency	80Hz to 8KHz (Sweepable)
Crossover Cutoff Slope	24dB/Oct
Subwoofer Frequency	60Hz to 250Hz (Sweepable) 24dB/Oct
High Pass Filter	30Hz, 18dB/Oct
Input Sensitivity	0dBu (0.775Vrms) Normal
Input Impedance	20Kohm active balanced
Maximum Input	+20dBu
Output Level	0dBu Normal
Output Load Impedance	600ohm rated active balanced
Maximum Output	+20dBu
Frequency Response	20Hz to 20KHz (±1dB)
Distortion (THD)	Less than 0.1%
Signal to Noise Ratio	80dB greater
Power Source	AC 220V, 50/60Hz
Power Consumption	150W Max
Dimensions	482(W) x 45(H) x 280(D) mm
Weight	4kg